PowerGen 1200

PowerGen 1200
Output Configuration:
120/240 VAC Split Phase
Output A: 120 VAC/60 Hz
Output B: 120 VAC/60 Hz
180 Phase Angle
SmartView – All New Orders:
(Includes 12 months free monitoring, cellular modem, booster, and mtg. hardware)
**After 12-month SmartView trial: –
(includes all software and firmware upgrades, software support, unlimited login) ** to be paid by end user direct to Qnergy.

Fuel source
Dry Natural gas or Propane-fueled
Closed loop cooling system
673-935 Cubic feet/day of gas heat value from 751 BTU/cuft to 1,215 BTU/cuft wellhead gas
Note: capable of burning up to 1,000 PPM H2S

RJ45 Ethernet
Modbus RTU Protocol
SmartView Data viewer
Configurable I/O’s
8 x (16-20 AWG) (Max 250 V/1A) Outputs (Relay)

NOx @ 5% O2: 30.0 ppm, 66 mg/kWh
CO @ 5% O2: 45.0 ppm, 60 mg/kWh
Additional heat available: 2.5 to 3.5 x power output available as hot glycol for heat tracing

Dimensions, weight, foundation requirements:
69.4″ Long x 28.1 Wide x 57.2 High (Note HRU/radiator can be mounted remotely from engine/generator)
866 lbs dry weight
concrete pad foundation: 3′ x 6′ on a tamped gravel base or piles.

Certifications for both units
ETL C and US
UL 2200
CSA C22.2#100/C22.2#14
ISO 9001.2015 (target certification: 2018)


Glycol circulation package
( does not include glycol, tubing or insulation)

-40 Cold Weather Start Hardware

PowerGen 5650 – 5 year Recommended Spares KIT

google-site-verification: google356fedec9780b2de.html